English
العربية
Türkçe
- Set of 8 changeable cutting heads (can be increased upon request)
- Vacuum aluminum system in matrix form
- Delta Type Control System
- 1.5 kW servo motor with gearbox to increase torque
- Third axis motor (spindle motor) of different sizes 7.5 – 9.5 – 11.0 kW
- Spindle Motor speed ranges from 18000 – 24000 kHz
- Metal body designed to remove initial voltage
- 12 Designated Area for vacuum
- Heads Holder
- Artcam 2D software
- Working speed of axis x and y up to 50m per minute
- Total working speed up to 12 meters per minute
- Linear Holders for Axes X and Y
- planetary gearboxes mounted on x and y axis with precision working spiral system
- Delta z-axis 750W engine
- Alarm System When Error
- Working in accordance with the Global G Code System
- Identification of DXF, STL, HPGL formats
- Sensor for measuring air pressure
- Total power consumption 10 – 15 kW
- Two-years warranty
CNC Cutting Machine With ATC
Take an Offer
One of the strongest options between the CNC machines with the same working system which will always be stronger and faster to help you. due to the superior working environment, it will be the first choice for companies that want to speed up the production process within less time. 8-head cutting and milling machine with the possibility of increasing the number of heads during the design. Ability to change heads during work to give you more speed and accuracy. Different measurements range from 3200 * 1600mm to 6000 * 2100mm with axis speed up to 50m per minute. Servo engines were used to design the machine instead of the step engines in the lower priced machines to give servo engines the advantage of speed and greater torque during the work.
Take an Offer
One of the most used models of CNC router machine, it is used in the advertising furniture industry in decorative products, signage and stand productions, Styrofoam, plastic industry, in many production networks such as 3-dimensional (3D) modeling. It is a step motor model and is a preferred cause for workmanship where precision work is not performed.
3 Axis cnc routers are step motorized cnc routers used in the industries of souvenirs, advertising, signage, etc. on CNC Router machines. 3 Axis CNC Router machines Mach3 or DSP hand panel control system is preferred depending on the need for use. Choice of aluminum slot header or optional mdf header is available. The CNC Router meets its demands due to the 150 × 300 cm 160 × 320 210 × 400 cm header dimensions.
Take an Offer
A closed-type fiber laser cutting machine is a laser cutting machine made for industrial production as a dual header. The machine is able to make production with powers 2 kw, 3kw, 4kw, 6kw, 8kw, 10kw and 12kw. It is generally preferred for high-production businesses and for companies with fason metal laser cutting.
The metal fiber laser cutting machine is powered by 2 x 2 kw For Y axis, X axis 1.5 kw and Z axis 0.75 kw servo motors (Japanese Yaskawa). Control unit Fagor & Cypcut, Linear sledge Japanese THK & Taivan Hiwin (4-point contact ball skids), Rack German Gudel & Wittenstein precision, low-clearance precision planetary reducer with reducer Shimpoo helical thread, 10,000 kg precision machined steel body.
Take an Offer
This model is used in embossing on small pieces and in works that do not need long working hours. This machine is found in many production sectors, such as engraving copper molds, aluminum, decorative products, sterophom, plastics industry and 3D modeling.
This machine is a very practical model that doesn’t take up much space and can be designed for any space you require. Machine work options are available in both Mach3 or DSP panel
Take an Offer
The machine is characterized by high precision glass cutting speed.
The automatic cutting head makes a cut according to the coordinates that are entered to the glass cutting machine.
Glass board loading is easily done by the operator after taking the cutting table to the vertical position where the air cushions rise 85 degrees to be easily loaded on the specially manufactured edges to apply the locking process on the board.
Take an Offer
Amazing design of CNC machine model which is used in the advertising furniture industry in decorative products, signage and stand productions, Styrofoam, plastic industry, in
many production networks such as 3-dimensional (3D) modeling. It is a servo powered model, which allows precision work and 7/24 high performance operation.
Manufactured in accordance with the shift operating condition in factory production.
Take an Offer
There are many glass cutting machines and many glass boards cutting tables options that perform the same purpose, but there are few products that do the whole job without the worker’s intervention.
This is the most important feature of this glass cutting machine, which contains the specifications of cutting glass according to the entrance coordinates, but the ease of loading the glass board to the machine is the most attractive feature. A three-point suction system was installed to to move up at the beginning of the machine’s work and automatically hold and bring the glass from the backrest on which the glass boards were placed in advance for the machine to take the glass board and begin the required cutting process. This Feature of course will be a big reason to choose this machine and will increase the production speed and the efficiency of the production.
Take an Offer
Integrated production line for glass cutting process without manual intervention by operator. The glass boards are automatically loaded by CNC glass cutting machines with loading arms. Then the cutting process begins on the machine according to the coordinates given by the screen. When the glass cutting is finished, the discharge process and the separation of the glass for the pieces that have been cut will start. All these operations are carried out on transfer conveyor that allows for easy movement of the following and extends according to a specific design based on available space.
Take an Offer
Open type single header metal fiber laser cutting machine. it is a fiber laser cutting machine preferred by medium to small metal laser cutting companies, manufactured at 500watt, 750 watts, 1000 watts, 1500 watts, 2000 watts.
Fiber laser cutting machine open header and 2500 × 4500 mm outer dimensions, cutting area of 1500 × 3000 mm, Raycus Fiber Laser welding, German and Japanese Mechanical components, Japanese SMC or German Festo Pneumatic system, Spanish Fagor or or far East Cypcut, Weihong, Mpower, controls such as system, Yaskawa or Delta servo motor systems, 4000 kg steel precision machine body.
Take an Offer
Automatic CNC glass cutting machine with very high cutting precision that is changeable from the HMI screen.
The glass boards are loaded onto the machine easily after the machine turns to the loading position (vertical position) so that the worker can load the glass panels onto the glass cutting machine and then begin the phase of cutting the glass board according to the coordinates entered by the control screen that connected with the machine.
Glass cutting machine in different sizes and thickness fits needs. Made and programed in Turkey. So if you are looking for CNC glass cutting machine made in Turkey you are in the right place.
Take an Offer
Manual glass cutting table gives the opportunity to get rid of the old traditional glass cutting process.
Glass cutting is done with various glass measurements and shapes to contribute to the development of your work during the glass installation process.
The glass board is placed on the glass cutting table manually and the air cushion system allows the easy movement of the board from one angle to another to give the worker the possibility to cut glass easily.