Home  /  Cutting Machines  /  Glass  /  CNC Glass Cutting Machine With Glass Loading Arms

Glass Cutting Line
CNC Glass Loading – Cutting – Emptying Line Take an Offer
CNC Glass Cutting Table
CNC Glass Cutting Table Take an Offer
CNC Glass Cutting Machine With Loading Arms
Semi-Automatic Glass Cutting Table with loading arms
Semi-Automatic Glass Cutting Table
CNC Glass Cutting Machine With Loading Arms
CNC Glass Cutting Machine With Loading Arms
Semi-Automatic Glass Cutting Table with loading arms
Semi-Automatic Glass Cutting Table
CNC Glass Cutting Machine With Loading Arms
Zoom
Roll over image to zoom in

CNC Glass Cutting Machine With Glass Loading Arms

Take an Offer

There are many glass cutting machines and many glass boards cutting tables options that perform the same purpose, but there are few products that do the whole job without the worker’s intervention.
This is the most important feature of this glass cutting machine, which contains the specifications of cutting glass according to the entrance coordinates, but the ease of loading the glass board to the machine is the most attractive feature. A three-point suction system was installed to to move up at the beginning of the machine’s work and automatically hold and bring the glass from the backrest on which the glass boards were placed in advance for the machine to take the glass board and begin the required cutting process. This Feature of course will be a big reason to choose this machine and will increase the production speed and the efficiency of the production.

Size Guide

Machine specifications:

  • Air Cushions System
  • Speed Cutting Glass Calibrated
  • Pressure Shearing Calibrated Glass
  • Transmission With RAK Helical System
  • Separation of clipped glass with compressed break bars
  • High safety pressure system
  • 2 hydraulic cylinder structures
  • Slow stop at the end of movement
  • Tilts integrated into the header for easy loading of the glass plates – lift-up handle feature
  • Suction unit lever system
  • Computer Control
  • Remote Access
  • Data transfer via USB and CD, if desired, the network connection system can be added
  • Fan structure suitable for balance and vibration
  • Unified air distribution on the vertical face
  • Electrostatic dust painted against corrosion
  • Electric feed according to European specifications

 

Technical specifications:

  • Max. Glass Bale: 3700 x 2650 mm
  • Cutting glass Thickness: 2 to 19 mm
  • Cutting Speed: 120 m/min
  • Low-e Slow Speed: 40 m/min
  • Cutting Sensitivity: +/- 0.20 mm
  • Width: 4500 mm
  • Length: 3700 mm
  • Height: 970 mm
  • Weight: 2400 kg
  • Voltage: 400 V 3NPE
  • Frequency: 50-60 Hz
  • Total Power: 16 KW
  • Air Pressure: 6 bar
  • Air consumption: 24 lt/min

CNC Glass Cutting Machine With Loading Arms

Categories: , , Tags: , , , , , , , , ,

Related Products

Quick View
, ,
CNC Routary Machine With Servo Motors
Take an Offer

Amazing design of  CNC machine model  which is used in the advertising furniture industry in decorative products, signage and stand productions, Styrofoam, plastic industry, in
many production networks such as 3-dimensional (3D) modeling. It is a servo powered model, which allows precision work and 7/24 high performance operation.
Manufactured in accordance with the shift operating condition in factory production.

Semi-Automatic Glass Cutting Table
Quick View
, ,
Semi-Automatic Glass Cutting Table
Take an Offer

The machine is characterized by high precision glass cutting speed.
The automatic cutting head makes a cut according to the coordinates that are entered to the glass cutting machine.
Glass board loading is easily done by the operator after taking the cutting table to the vertical position where the air cushions rise 85 degrees to be easily loaded on the specially manufactured edges to apply the locking process on the board.
Quick View
, ,
CNC Laser Cutting Machine Closed Type
Take an Offer

A closed-type fiber laser cutting machine is a laser cutting machine made for industrial production as a dual header. The machine is able to make production with powers 2 kw, 3kw, 4kw, 6kw, 8kw, 10kw and 12kw. It is generally preferred for high-production businesses and for companies with fason metal laser cutting.

The metal fiber laser cutting machine is powered by 2 x 2 kw For Y axis, X axis 1.5 kw and Z axis 0.75 kw servo motors (Japanese Yaskawa). Control unit Fagor & Cypcut, Linear sledge Japanese THK & Taivan Hiwin (4-point contact ball skids), Rack German Gudel & Wittenstein precision, low-clearance precision planetary reducer with reducer Shimpoo helical thread, 10,000 kg precision machined steel body.

MANUAL GLASS CUTTING TABLE
MANUAL GLASS CUTTING TABLE_2
Quick View
, ,
Manual Glass Cutting Table
Take an Offer

Manual glass cutting table gives the opportunity to get rid of the old traditional glass cutting process.
Glass cutting is done with various glass measurements and shapes to contribute to the development of your work during the glass installation process.
The glass board is placed on the glass cutting table manually and the air cushion system allows the easy movement of the board from one angle to another to give the worker the possibility to cut glass easily.

Glass Boards Washing machine
Quick View
, ,
Glass Washing Machine
Take an Offer

Glass board Washing Machine is used to wash glass surfaces such as doors or windows. Glass boards are entered into the glass washing machine manually then move through the conveyor to the washing section where the glass is carefully washed and then dried using a special drying fan. The board will then be removed from the washing section by the conveyor so that the worker can pick up the glass boards and install it or use it in other operations.
Quick View
, ,
Mini Router CNC Machine
Take an Offer

This model is used in embossing on small pieces and in works that do not need long working hours. This machine is found in many production sectors, such as engraving copper molds, aluminum, decorative products, sterophom, plastics industry and 3D modeling.

This machine is a very practical model that doesn’t take up much space and can be designed for any space you require. Machine work options are available in both Mach3 or DSP panel

Glass Cutting Line
Quick View
, ,
CNC Glass Loading - Cutting - Emptying Line
Take an Offer

Integrated production line for glass cutting process without manual intervention by operator. The glass boards are automatically loaded by CNC glass cutting machines with loading arms. Then the cutting process begins on the machine according to the coordinates given by the screen. When the glass cutting is finished, the discharge process and the separation of the glass for the pieces that have been cut will start. All these operations are carried out on transfer conveyor that allows for easy movement of the following and extends according to a specific design based on available space.

Glass Boards Washing machine Wıth Roller Press_1
Glass Boards Washing machine Wıth Roller Press_1
Quick View
, ,
Glass Washing Line With Roller Press
Take an Offer

Glass pressing machine is used to produce double layer glass board. The glass pressing machine inserts the first glass board where it is equipped and the adhesive is placed on it for the pressing process, after that the glass panel moves to the inside of the pressure section where the other board is waiting to come. When the other board enters the pressure section, the pressing is applied using the roller, which turns the glass boards into a single glass board.

CNC Glass Cutting Table
CNC Glass Cutting Table
Quick View
, ,
CNC Glass Cutting Table
Take an Offer

Automatic CNC glass cutting machine with very high cutting precision that is changeable from the HMI screen.

The glass boards are loaded onto the machine easily after the machine turns to the loading position (vertical position) so that the worker can load the glass panels onto the glass cutting machine and then begin the phase of cutting the glass board according to the coordinates entered by the control screen that connected with the machine.

Glass cutting machine in different sizes and thickness fits needs. Made and programed in Turkey. So if you are looking for CNC glass cutting machine made in Turkey you are in the right place.
Quick View
, ,
CNC Laser Cutting Machine Open Type
Take an Offer

Open type single header metal fiber laser cutting machine. it is a fiber laser cutting machine preferred by medium to small metal laser cutting companies, manufactured at 500watt, 750 watts, 1000 watts, 1500 watts, 2000 watts.

Fiber laser cutting machine open header and 2500 × 4500 mm outer dimensions, cutting area of 1500 × 3000 mm, Raycus Fiber Laser welding, German and Japanese Mechanical components, Japanese SMC or German Festo Pneumatic system, Spanish Fagor or or far East Cypcut, Weihong, Mpower, controls such as system, Yaskawa or Delta servo motor systems, 4000 kg steel precision machine body.
Quick View
, ,
CNC Cutting Machine With ATC
Take an Offer

One of the strongest options between the  CNC machines with the same working system which will always be stronger and faster to help you. due  to the superior working environment, it will be the first choice for companies that want to speed up the production process within less time. 8-head cutting and milling machine with the possibility of increasing the number of heads during the design. Ability to change heads during work to give you more speed and accuracy. Different measurements range from 3200 * 1600mm to 6000 * 2100mm with axis speed up to 50m per minute. Servo engines were used to design the machine instead of the step engines in the lower priced machines to give servo engines the advantage of speed and greater torque during the work.
Quick View
, ,
CNC Router Cutting Machine
Take an Offer

One of the most used models of CNC router machine, it is used in the advertising furniture industry in decorative products, signage and stand productions, Styrofoam, plastic industry, in many production networks such as 3-dimensional (3D) modeling. It is a step motor model and is a preferred cause for workmanship where precision work is not performed.
3 Axis cnc routers are step motorized cnc routers used in the industries of souvenirs, advertising, signage, etc. on CNC Router machines. 3 Axis CNC Router machines Mach3 or DSP hand panel control system is preferred depending on the need for use. Choice of aluminum slot header or optional mdf header is available. The CNC Router meets its demands due to the 150 × 300 cm 160 × 320 210 × 400 cm header dimensions.

Navigation
Viewed

Recently Viewed

Close

Quickview

Close

Categories

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it. Privacy Policy Accept